eprosDrainLCR-S Brochure .pdf
Trelleborg Flyer MtH
Lateral Repairs can offer total supply of Lateral sealing systems, based on site experience we can help in selecting the right system for your project from Dn50 – Dn600 and up to 35meters from single point of excess.
With this method you can install in main pipes from DN 100 to DN600 with branch pipes from DN 100 to DN200. Connection angles from 30 ° to 90 °. The epros®DrainLCR-S packer is user-friendly and flexible. In order to complete the perfect installation of either a hat or liner, the process of a camera attached to the pack is monitored. When moving the LCR-S packer, use either the stacking rods / cable or a tractor.
LCR-S packerDN135 – DN600 with varying branch pipe connection from DN100-200 / 45 ° and 90 °.
LCR-S Packing leather DN135 – DN600 with varying branch pipe connection from DN100-200 / 45 ° and 90 °.
epros®DrainLCR-B allows repair of branch pipe connections without tearing down walls. The epros®DrainLCR-B packer enters existing openings in the overflow or drainage line. The LCR-B packer is very flexible, and slides easily 45 ° bend into a DN100 main line and 90 ° bend in DN125 or greater. The method is that an inspection camera enters the branch pipe and looks into the mains lead. The camera will monitor the positioning of the LCR-B packer and the blowout process. Both strike of the LCR-B packer and air supply to blow up packs are operated with LCR stacks. LCR stacks are delivered in 0.7m, 1.5m and 3.0m lengths and are stock items at Dacon. All connections and adapters between rods and packers are also stocked.
LCR-B packerDN100 / DN50-150 / 45 ° and 90 °.
Packing leatherDN100 / DN50-150 / 45 ° and 90 ° (stock item).
Basket Available for DN50 – 75 – 100.
epros®SilicateResinSilicate glue and sheath are supplied in various racks, adapted to summer and winter conditions (storage goods).
A no-you method; epros®DrainMtH is a rehabilitation system for sealing and stabilizing branch pipe connections all the way to the house via the associated sewers. There is no need to enter private property. The system is suitable for main pipeline up to 150m from DN200 to DN225 and branch piping dimensions from DN100 to DN200 with maximum rehabilitation length of 30m. Can travel bend from 30 ° to 90 °. The device is easy to place properly. The liner used has excellent properties due to the material strength of 85% fiberglass and 15% plastic fiber. It is also 100% steam resistant. The liners can withstand pressures up to 1.5bar. No risk due to only 2 hours working time on resin and very short recovery time. There is no need for a calibration hose. All resin and Inliner are DIBT approved.